CM-9B Semiautomatic bottle blow molding machine
Specification:
CM-9B semiautomatic bottle blow molding machine is suitable for
producing PET plastic containers and bottles from 10-2000ml. It is widely
used to produce the carbonated bottle, mineral water, pesticide bottle oil
bottle cosmetics, wide-mouth bottle etc.
● Adopting double crank to adjust mould ,heavy locking mould, stable and
fast ,Adopt infrared oven to heat the perform ,the perform rotated and
heated equally.
● The air system has been divided into two parts: pneumatic action part and
bottle blow part to meet the different requirements for the action and blow.
It can provide sufficient and steady high pressure for blowing large irregular
shaped bottles.
● The machine is also equipped with muffler and oiling system to lubricate
the mechanical part of the machine.
● The machine can be operated in the step-by-step mode and the semi-
auto mode.
● The machine is small with low investment, easy and safe to operate by one
person.
Main parameter：
| TYPE |
ITEM |
UNIT |
PARAMETER |
| Container |
Product material |
/ |
PET |
| Container volume |
L |
5-6L(2-1cavity) |
| Theoretical output |
PCS/H |
300PCS/H |
| Prefom length |
mm |
15-460 |
| Preform inner diametrt |
mm |
￠15-200 |
| Mouding |
Max.mould plate Dimenstion(L*W) |
mm |
470*500 |
| Max.mould thickness |
mm |
370 |
| Clamping force |
KN |
330 |
| Mould opening stroke |
mm |
330 |
|
Machin size and
weight
|
Main machine(L*W*H) |
cm |
188*72*180 |
| Main machine weight |
T |
0.5 |
| Heater (L*W*H) |
cm |
188*63*146 |
| Heater weight |
T |
0.25 |
